57.1mm Hub Spigot Extenders (Pair)
Crucial to use when fitting non-hubcentric spacers (8mm & under)
Vagbremtechnic hub spigot extenders for 57.1mm hubs.
When fitting wheel spacers, usually below 10mm, they are known as being NOT Hubcentric, this means that there is very little wheel contacting the hub for weight transfer, and in some cases no contact at all and all the weight of the car is going through the wheel bolts.
With these hub extenders these tightly fit in to the OE hub and extends the hub length so that proper wheel to hub contact is made. Making sure that the weight of the car is put though the hub and not the wheel bolts.
These extenders are a very tight fit in to the OE hub so for correct fitment proper cleaning of the hub is required.
These are not typically required when fitting H&R part number B1655572 or 1655572 as these 8mm hubcentric spacers have enough of a lip, dependant on wheel / vehicle etc.
- Handling
- Wheel Spacers
- Wheels & Tyres
- Wheel Accessories
For more in depth information regarding our shipping, returns and refund policies, please refer to our Webstore Terms & Conditions. These can be viewed - Here