JXB Performance Driveshaft Centre Support Bearing Carrier Upgrade For Audi D4 A8 / S8 - D4001A0
Holds the propshaft where it should be, isolation dampers minimise vibration
JXB Performance Driveshaft Centre Support Bearing Carrier Upgrade For Audi D4 A8 / S8 - D4001A0
The Problem
Thestock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with flimsy rubber spokes. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment.
The Solution
This upgraded unit keeps the driveshaft firmly in place at all times, and its solid construction ensures it will never wear out. The thick bushings ensure the driveshaft cannot move from center, maintaining driveshaft alignment at all times. Isolation dampers separate the carrier frame from the body, minimizing NVH transmission.
The Bushings
Two options are available for the bushings, both of which are many times over better than the stock bushings. We've paid close attention to the NVH levels associated with this upgrade. After extensive design iterations, we've come up with custom isolator bushings that separate the carrier from the body of the vehicle and mounting hardware. These carriers substantially reduce NVH levels.
The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. With a modified exhaust or windows down you'll probably never hear it.
The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they're interchangeable!
Installation
Installation doesn't require removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. This part is designed to avoid interference with the factory heatshields and exhaust.
Fitment
Audi D4 A8
Audi D4 A8 LWB
Audi D4 S8
Street - D4001A0-S
Track - D4001A0-T
Both - D4001A0-B
Videos
https://youtu.be/yczp3NW3RLI
https://youtu.be/lCMWq2sajXo
- Transmission
- Propshaft / Driveshaft
For more in depth information regarding our shipping, returns and refund policies, please refer to our Webstore Terms & Conditions. These can be viewed - Here